Onu GPON automatic control catv port with OLT OMCI COMMAND wifi 2.4 G 2 ethernet 1G/1F ....port RF

Product Code: Onu wifi 2 eth
Availability: In Stock

Price: $0.00
Ex Tax: $0.00

Qty:

Description Reviews (0)

Onu gpon catv por and 2 ethernet por 1g/1f . OMCI command vlan DHCP/PPPOE Control with OLT zte omci command and TR069 compatible.

Characteristics

1. Main service: 1GE+1FE+1WIFI+CATV

2. Plug and play, integrate auto detection, auto configuration and auto firmware upgrading

3. Integrate TR-069 remote configuration and maintenance

4. Support flexible QinQ VLAN,DHCP server/relay and IGMP/ MLD multicast monitoring function

5. Support diagnostic monitoring and remote disabling of fiber optical

6. Compatible with Huawei,ZTE and Fiberhome OLT

7. Support 802.11n WiFi(T/R)function

8. Support NAT and firewall function

9. WAN support networking bridge, router and bridge/router mixed mode

Data Service Functions

1. Full speed 1G non-blocking switching

2. 2048 MAC address table

3. Support VLAN QinQ, transparent, tag, translation, trunk, etc.

4. Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc

5. Support auto polarity detection of Ethernet ports (AUTO MDIX)

6. Integrated IEEE802.1p QoS with four level priority queues

7. Support IPv4 IGMP snooping and IPv6 MLD snooping

8. Support bridging, router and bridging/router mixed mode

Wi-Fi service

1. Support Integrated 802.11b/g/n, 300Mbps, 2T2R.

2. Support 64 connections

3. Support WEP and WPA/WPA2 security protocols.

Features

Features	Functions
GPON	ITU-T G.984 GPON Standard support GEM Encapsulation mode support DBA(Dynamic Bandwidth Assignment) support 40 T-CONT& 256 GEM Port support Class B+ Optical power budget Based VLAN to GEM Port mapping mode support FEC (Forward Error Correction) Implementation of embedded OAM (Operations, Administration and Maintenance), PLOAM (Physical Layer OAM), OMCI support downlink 128bit AES(Advanced Encryption Standard) encryption support power off Alarm
VLAN	support port-based VLAN and IEEE 802.1Q VLAN support full range of VID and PVID support tag attributes setting based on Port +VLAN
broadcast storm suppression	Broadcast message number can be set up
STP	support IEEE 802.1d/1s/1w spanning tree protocol
Port aggregation	support
Bandwidth Control	support 64K - 100M, Receive and send control respectively
Mirror Image	support port mirror function
QoS	supportpriority based on port / 802.1 p/IP -TOS support 4 level priority control
Upgrade	support Xmodem, TFTP to upgrade
Management	support GN.Link cluster management and remote upgrade (Client side) support Telnet Remote configuration support SNMP Management support WEB management
Security features	support administrator’s password centralized authentication support port locking, limit the number of MAC addresses per port support802.1x
Maintenance	support debugging information output support PING support system log

Fiber interface	SC/PC
RX sensitivity	<-28dBm (1490nm)
WLAN	IEEE802.11b/g/n,300Mbps, a built-in antenna
LAN	110/100/1000Mbps+110/100Mbp adaptive ethernet ports, full/half duplex, RJ45 interface
DC power	12V 0.5A, external AC-DC power adapter
Button	Reset, power, WIFI
Power	≤10W
Operation	Working temperature: -5-+55℃ working humidity:10-90%(non-condensation)
Storage	Storage temperature: -30℃-+60℃ storage humidity: 10-90%(non-condensation)
Dimension	13010731mm(lengthwidthhighth)
Net weight	≤0.2Kg

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: